Diagnostic Test

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

DRIVE TRAIN CONTROL MODULE (DTCM) VERIFICATION TEST

Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
With the scan tool, Clear the DTCs.
Make sure that all accessories are turned off and that the battery is fully charged.
Test drive the vehicle and verify proper operation.
With the scan tool, read the DTCs in the DTCM.
Are there any DTCs present in the DTCM?

Yes
- Perform the appropriate diagnostic test. Refer to DIAGNOSIS AND TESTING .
No
- Repair is complete.