Diagnostic Test

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY THE DTC IS ACTIVE

NOTE:

Make sure the IOD fuse is installed and battery Voltage is between 10 and 16 Volts before proceeding.

Turn the ignition on.
With the scan tool, read DTCs.
Is the DTC active at this time?

Yes
- Refer to DIAGNOSIS AND TESTING . Perform the diagnostic procedure for U0001-CAN C BUS first if it is present.
- Perform the NAG1 TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Refer to DIAGNOSIS AND TESTING and perform the STORED LOST COMMUNICATION DTCs diagnostic procedure.