LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Durango 4WD V8-5.7L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair >> Drivetrain Control Module - Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drivetrain Control Module - Installation






INSTALLATION





1. Position the Drive Train Control Module (DTCM) (3) in the mounting bracket.
2. Slide the module into place until the locking tabs are secure.
3. Connect the body wire harness connector to the module connector receptacle.
4. Install the cover panel onto the electronic module tub (4).
5. Connect the negative battery cable. Negative Cable, for battery location and cable connection procedure.

scientia non olet · About LEMON Manuals