Programming The Win
CAUTION:
Read all notes and cautions for programming procedures.
- Connect a battery charger to the vehicle.
- Connect the scan tool.NOTE:
Have a unique vehicle PIN readily available before running the routine
CAUTION:If the PCM and WIN are replaced at the same time, the PCM MUST be programmed before the WIN.
- Select "ECU View."
- Select "WIN".
- Select "Miscellaneous Functions."
- Select "WIN Replaced".
- Enter the PIN when prompted.
- Cycle ignition key after the successful routine completion.
NOTE:
If the PCM and the WIN are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new WIN.