To Disable A RKE Transmitter Linked To Memory
- Turn the ignition switch to the OFF position and remove the key.
- Press and release the memory SET button located on the driver's seat.
- Within 10 seconds, press and release the UNLOCK button on the RKE transmitter.
To disable another RKE transmitter linked to either memory position, repeat Steps 1-3 for each RKE transmitter.
NOTE:
The capability to link RKE transmitters to memory is enabled when delivered from the factory. The capability to link RKE transmitters to memory can be disabled (or later re-enabled) by an authorized dealer. For vehicles equipped with the Electronics Vehicle Information Center (EVIC) under setup features.