LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 ((Transmission Control Module (TCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> P0722-Output Speed Sensor Circuit No Signal >> Set Condition:
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Set Condition:

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Condition one:  Output speed rpm is less than 150 rpm with a Input speed rpm greater than 1000 rpm for the period of 5 seconds.

Condition two:  Vehicle speed is greater than 20 Km/h (12.5 mph) calculated by the last secondary speed with the current Output Speed value equals to 0 rpm for the period of 500 msec.

Condition three:  Both the Input and Output Speed sensors are less than 150 rpm with a actual vehicle speed greater than 10 Km/h. (Note: this is an indication of either the power supply to both sensors is open or the C106 connector is disconnected.)

scientia non olet · About LEMON Manuals