Module, Compass: Installation: Installation
WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RHD model shown in illustration. LHD model similar.
- Position the Remote Compass Module (RCM) (5) on top of the instrument panel.
- Install the screws (6) that secure the RCM to the instrument panel.
- Connect the RCM electrical connector (1).
- Install the instrument panel top cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION .
- Connect the battery negative cable.