LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control >> Standard Procedure >> Pcm/ECM / TCM Programming >> Section 2 - Additional Pcm/ECM / TCM Replacement Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 2 - Additional Pcm/ECM / TCM Replacement Procedures

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Find the PCM/ECM /TCM Type for the vehicle, read and write down the steps, and then go to the step by step instructions for additional information on how to perform these procedures. Refer to  STEP-BY-STEP INSTRUCTIONS  . 

If a 2.0L Controller was replaced, navigate to "Misc. Functions" and perform all applicable routines: 

NOTE:

The available routines may vary depending on model and year of vehicle.

  1. PCM/ECM Replaced - Located within the Security Module
  2. ECU Replacement With Value Transfer - if the ECU to be replaced is still responsive
    NOTE:

    If the PCM/ECM data transfer is able to be completed, it may not be necessary to perform routines 7 - 9.

  3. ECU Replacement Without Value Transfer - if the ECU to be replaced is NOT responsive
  4. Verify PCM/ECM VIN
  5. Injector Quantity Adjustment
  6. Program Variant Code
  7. Service Diesel Particulate Filter Regeneration
  8. Reset Zero Fuel
  9. Reset of Lambda Values
scientia non olet · About LEMON Manuals