LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Transmission Control >> Standard Procedure >> Standard Procedure - Transmission Control Module Initialization >> Relearn, After Replacing A Transaxle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relearn, After Replacing A Transaxle

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition key to RUN.
  2. Clear learning memory using the scan tool.
  3. Turn the ignition key to OFF/LOCKED for 2 seconds.
  4. Turn the ignition key to RUN Clear DTCs.
  5. Turn the ignition key to OFF/LOCKED for 2 seconds.
  6. Turn ignition key to RUN.
  7. After at least 7 seconds, read DTCs.
  8. If DTCs resets. Refer to DIAGNOSIS AND TESTING .
scientia non olet · About LEMON Manuals