LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Standard Procedure >> Standard Procedure - SKREEM Programming >> Programming The Skim
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming The Skim

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Read all notes and cautions for programming procedures.

  1. Connect a battery charger to the vehicle.
  2. Connect the StarSCAN®.
    CAUTION:

    If the ECM/PCM and SKREEM/WCM are replaced at the same time, the ECM/PCM MUST be programmed before the SKREEM/WCM.

  3. Select "ECU View".
  4. Select "WCM Wireless Control Module".
  5. Select "Miscellaneous Functions".
  6. Select WCM replaced.
  7. Enter the PIN when prompted.
  8. Verify the correct information.
NOTE:

If the ECM and the SKIM are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new SKIM.

scientia non olet · About LEMON Manuals