Body Control Module - Installation

INSTALLATION





1. Position the Body Control Module (BCM) (1) in the vehicle.
2. Install the two fasteners (4) at the bottom of the module and tighten securely.
3. Connect the electrical connectors to the BCM receptacles (2 and 3) as needed.





4. Position the fuse box (2) in the mounting bracket track.
5. Connect the electrical connectors (4) to the fuse box.
6. Raise the fuse box assembly up into place, and engage the clip (3).





7. Install the glove box assembly (1) Instrument Panel Glove Box - Installation.
8. Install the lower hush panel (3) and install the two push-pin type retainers.
9. Connect the negative battery cable.

NOTE: Program the BCM in accordance with the module replacement and programming guide . Service and Repair