Radio Frequency Module (RF Hub) - Installation

INSTALLATION

NOTE: Replace and Program the module(s) per the RF-Hub, BCM, PCM FOBiK and ELV Replacement and Programming Order Guide . RF Hub, BCM, PCM, FOBiK, And ELV Replacement And Programming Order





1. Position the RF Hub (3) to the vehicle and install the retainers (2).
2. If equipped, connect the remote start antenna connector.
3. Connect the electrical connectors (1).





4. Install the headliner Headliner - Installation
5. Connect the Intelligent Battery Sensor (IBS) to the negative battery post.

NOTE: Program the RF-Hub . Programming and Relearning