Powertrain Control Module - Installation

GAS






NOTE: USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL IDENTIFICATION NUMBER (VIN) AND THE VEHICLES ORIGINAL MILEAGE. IF THIS STEP IS NOT DONE, A DIAGNOSTIC TROUBLE CODE (DTC) MAY BE SET.

1. Install PCM (2) to bracket (1) with 4 bolts (3).





2. Install and lock the 2 electrical connectors (1) to the PCM (2).
3. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
4. Use the scan tool to reprogram new PCM with vehicles original Identification Number (VIN) and original vehicle mileage.