Fold/Stow Module - Installation

INSTALLATION





1. Position the fold and stow module (1) onto the bracket (3). Ensure the retaining pins (2) are aligned with the slots in the bracket.
2. Push the fold and stow module into the bracket until the two retaining tabs (4) are fully engaged to the bracket.





3. Connect the electrical connector (3) to the fold and stow module.
4. Position the fold and stow module and bracket (4) onto the seat pan (2).
5. Engage the push-pin retainers (1) to the seat pan.
6. Install the seat cushion and cover Seat Cushion Cover - Installation.
7. Install the third row power folding seat Seat - Installation.
8. Perform the third row power folding seat verification procedure Programming and Relearning.
9. Verify proper third row seat operation.