Fold/Stow Module - Removal

REMOVAL

NOTE: The third row fold and stow module is located in the 60 percent seat cushion pan. The following steps should be performed on the 60 percent seat only.





1. Remove the 60 percent third row power folding seat Seat - Removal.
2. Remove the seat cushion and cover Seat Cushion Cover - Removal.
3. Remove the push-pin retainers (1) that secure the bracket (4) to the seat pan (2).
4. Disconnect the electrical connectors (3) from the fold and stow module.





5. Disengage the two retaining tabs (4) that secure the fold and stow module (1) to the bracket (3).
6. Slide the fold and stow module (1) out of the bracket and disengage the two retaining pins (2).