LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Challenger SXT Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Transmission Control >> Installation >> Installation - Nag1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - Nag1

  1. Place the TCM (1) in position on the instrument panel support beam.
    Fig 1: Identifying TCM & Screws
    GC0154681Courtesy of CHRYSLER GROUP, LLC
  2. Install the screws (2) to hold the TCM (1) to the instrument panel support beam.
    Fig 2: Identifying TCM & Harness Connectors
    GC0154671Courtesy of CHRYSLER GROUP, LLC
  3. Push the wire connectors onto the TCM until the lock tabs click into position.
  4. Install the driver side knee blocker.
  5. Install the driver side under instrument panel silencer pad and courtesy lamp.
  6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals