Non-SRT Power Steering Fluid Level Checking

WARNING:

Fluid level should be checked with the engine OFF to prevent personal injury from moving parts and to assure an accurate fluid level reading.

CAUTION:

This vehicle features an Electro Hydraulic Power Steering (EHPS) pump which requires a different power steering fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The EHPS system uses fluid which meets material specification MS-11655 or equivalent.

NOTE:

Although not required at specific intervals, the fluid level may be checked periodically. Check the fluid level anytime there is a system noise or fluid leak suspected.

Fig 1: Pressure Hose Retaining Bolt & (EHPS) Pump

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The power steering fluid reservoir (4) is integrated with the Electro Hydraulic Power Steering (EHPS) pump.

Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove right front wheel mounting nuts, then tire and wheel assembly.
Remove right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
Ensure that the fluid is at the correct level in the power steering reservoir (4).