LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Dart GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (1.4L - Intermittent Condition, Pcm/ECM Reprogramming, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure) >> Standard Procedure >> Pcm/ECM Reprogramming >> Pcm/TCM Flash Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pcm/TCM Flash Reprogramming

WARNING: This page is about a different variant/trim than selected.

This procedure is required when one or more of the following situations are true:

  1. A Powertrain Control Module (PCM) has been replaced.
  2. Diagnostic Trouble Code (DTC) P1602 - PCM Not Programmed is set.
  3. An updated calibration or software release is available for either the PCM or TCM.

This procedure assumes that the wiTECH™ VCI Pod is properly configured to the dealership network with either a wired or wireless connection. The wiTECH™ VCI Pod must also be running the latest operating system and software release. For help on how to network the wiTECH™ VCI Pod, use the "Help" tab at the top of the wiTECH™ Diagnostic Application.

scientia non olet · About LEMON Manuals