LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango R/T, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Transmission Control >> Standard Procedure >> Drive Learn - 5.7L Vehicles >> Learn The 1ST 2-3 Shift After A Restart Or Shift To Reverse
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Learn The 1ST 2-3 Shift After A Restart Or Shift To Reverse

Use the following steps to have the TCM learn the 1st 2-3 shift OD CVI.

NOTE:

The transmission oil temperature must be above 27° C (80° F).

  1. With the vehicle engine running, select reverse gear for over 2 seconds.
  2. Shift the transmission to Drive and accelerate the vehicle from a stop at a steady 15 degree throttle opening and perform a 2-3 shift while noting the 1st 2-3 OD CVI.
  3. Repeat and refer to  1 until the 1st 2-3 upshift becomes smooth and the 1st 2-3 OD CVI stabilizes. Then refer to  2.