Module, Powertrain Control: Removal: Diesel

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Remove the engine cover (1).

Fig 2: Removing/Installing Cowl Panel
Courtesy of CHRYSLER GROUP, LLC
Remove the wiper arm linkage. Refer to LINKAGE, WIPER ARM, REMOVAL .
Remove bolts and the strut support brace (6).

Fig 3: Powertrain Control Module (PCM) Connectors
Courtesy of CHRYSLER GROUP, LLC
Disconnect the Powertrain Control Module (PCM) wire harness connector (1).

Fig 4: Crash Sensor Wire Harness Connector & Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the crash sensor wire harness connector (1) from inner fender.
Remove bolt (2) and the PCM with mounting bracket.

Fig 5: Nuts, PCM & Mounting Bracket
Courtesy of CHRYSLER GROUP, LLC
Remove nuts (2) and the PCM (3) from mounting bracket (1).