LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 ((Transmission Control Module (TCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> P0602-Control Module Programming Error/Not Programmed >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

WARNING: This page is about a different car, the 2012 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK IF THE TCM IS FLASHABLE 
    NOTE:

    Controller is programmed with generic software and will not allow the correct vehicle Powertrain management.

    1. With the scan tool, record the vehicles controller part number.
    2. Select Use Controller Part Number under the Flash Tab.
    3. Flash the controller with the correct software.

      Were you able to update (flash) the controller successfully?

      Yes 

      • Test Complete.
      • Refer to STANDARD PROCEDURE  and perform the NAG1 TRANSMISSION VERIFICATION TEST.

      No