Diagnostic Test

WARNING: This page is about a different car, the 2012 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

STEERING COLUMN CONTROL MODULE DTCS PRESENT
1. Ignition on, engine not running.
2. With the scan tool, read DTCs in the SCCM.
  Are there any DTCs present?
  
  Yes
  - Perform the appropriate diagnostic procedure. Refer to SCM - DIAGNOSIS AND TESTING .
  No
  - Replace the Drive Train Control Module (DTCM) in accordance with the Service Information. Refer to MODULE, DRIVETRAIN CONTROL, REMOVAL .
  - Perform the DTCM VERIFICATION TEST. Refer to STANDARD PROCEDURE - DTCM VERIFICATION TEST .