Module And Bracket

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect and isolate the battery negative cable.
Raise and support the vehicle.
Remove the front fascia from the vehicle. Refer to FASCIA, FRONT, REMOVAL .

Fig 1: Adaptive Cruise Control Module Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the wiring harness connector (1) from the Adaptive Cruise Control (ACC) module.
Remove the energy absorber from the vehicle.

Fig 2: Adaptive Cruise Control Module Bracket & Screws
Courtesy of CHRYSLER GROUP, LLC
Remove the two screws (2) that secure the bracket (1) to the front bumper support bar.
Remove the mounting bracket from the bumper support bar.