Dual Pane Sunroof Or Sunshade Obstacle Detection Update: Notes
WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The obstacle detection function (also known as Excessive Force Limitation/EFL) updates the sunroof sliding glass panel and sunshade closing profiles after each successful CLOSE event as long as temperature and voltage are within a normal range. Being certain that these parameters are within range and cycling the sliding glass panel and sunshade will update the obstacle detection settings in the electronic module software.
- Be certain electrical system voltage is at or above 12.5 volts.
- Be certain vehicle is in an area that is near room temperature - 20 to 25° C (68 to 77° F).
- Be certain the key is in the ignition switch and the switch is in the ON position.
- Be certain there are no physical binds or blockages to sliding glass panel or sunshade travel.