Dual Pane Sunroof: Notes
WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
A new motor is shipped uncalibrated with no vehicle cycles having been run. After installation and connection of the wire harness, the following steps must be taken to initialize the new motor and module unit.
NOTE:
Verify that the battery is in good condition prior to performing this procedure. Do not leave the vehicle on a battery charger while performing this procedure. If the voltage at the sunroof motor and module unit drops below 11 volts or exceeds 15 volts at anytime while this procedure is being performed, the motor and module initialization procedure will not be properly completed.