LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Electronic Control Modules (Service Information)) >> Module, Power Sunroof >> Module Programming >> Sunroof Motor And Module Initialization >> Dual Pane Sunroof >> Sunroof
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dual Pane Sunroof: Sunroof

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the ON position.
  2. Depress and hold the VENT push button of the sunroof switch until the sliding glass panel has moved to the fully vented position.
  3. Be certain that the sunshade has opened to at least beyond the back of the sliding glass panel opening before finishing the sunroof motor and module initialization.
  4. Depress the VENT push button of the sunroof switch and release. The sliding glass panel should travel to the fully vented position.
  5. Depress the CLOSE push button of the sunroof switch and release. The sliding glass panel should travel past the fully closed position, then reverse direction back to fully closed to set the sunroof seal.
  6. Depress the OPEN push button of the sunroof switch and release. The sliding glass panel should travel to the fully opened position.
  7. Depress the CLOSE push button of the sunroof switch and release. The sliding glass panel should travel to the fully closed position.
  8. Repeat Steps 4 through 7 for at least 5 complete sliding glass panel cycles (VENT, CLOSE, OPEN, CLOSE).
scientia non olet · About LEMON Manuals