Override - Method 1
WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Depress and hold the CLOSE push button of the sunroof or sunshade switch during the initial close, during the reversal and for 2 seconds after the reversal stops. If the CLOSE push button is released at any time between the initial close and the end of the 2 seconds after the reversal stops, the sunroof or sunshade will not enter override mode. Once the CLOSE push button has been held through these events, the sunroof or sunshade will be in primary override mode. All CLOSE push button commands will be in manual mode (no one-touch or express mode) while the obstacle detection feature is in primary override mode.