LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 698 (Electronic Control Modules (Service Information)) >> Module, HVAC >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, HVAC: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Illustration shown with instrument panel removed from view for clarity.

Fig 1: Wire Harness Connector, A/C Heater Module & Air Inlet Housing
GC0144553Courtesy of CHRYSLER GROUP, LLC
  1. Position the Heating, Ventilation, and Air Conditioning (HVAC) module (1) to the air inlet housing (4) and engage the module to the two front retaining screws (2).
  2. Loosely install the screw (5) that secures the rear of the HVAC module to the air inlet housing.
  3. Tighten all the screws that secure the HVAC module to the air inlet housing.
  4. Connect the wire harness connector (3) to the HVAC module.
  5. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
  6. Connect the negative battery cable.
  7. Perform the HVAC Verification Test. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals