LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango SXT, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Memory Seat Module (MSMD) - Electrical Diagnostics >> DTC Troubleshooting >> B221C-42-(MSM) Memory Seat Module Internal-General Memory Failure >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK IF THE DTC IS ACTIVE 
    1. Ignition on, engine not running.
    2. With the scan tool, record and erase Memory Seat Module-Driver (MSMD) DTCs.
    3. Cycle the ignition switch from off to on.
    4. With the scan tool, read MSMD DTCs.

      Does the scan tool display this DTC as active?

      Yes 

      • Attempt to update (flash) the MSMD. If you are unable to update the controller, or if this DTC continues to reset after updating, replace and program the Memory Seat Module (MSMD) in accordance with the Service Information. Refer to MODULE, MEMORY, SEAT, REMOVAL .
      • Perform POWER SEAT SYSTEM VERIFICATION TEST. Refer to STANDARD PROCEDURE .

      No 

      • The condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.
      • Perform POWER SEAT SYSTEM VERIFICATION TEST. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals