Possible Causes
| Possible Causes |
|---|
| DRIVER SEAT HARNESS IMPROPERLY ROUTED |
| DRIVER SEAT HARNESS WIRES CHAFED, PIERCED, PINCHED, PARTIALLY BROKEN |
| DRIVER SEAT HARNESS CONNECTOR TERMINALS BROKEN, BENT, PUSHED OUT, SPREAD, CORRODED, CONTAMINATED |
| (Z261) DRIVER SEAT POSITION SENSOR GROUND CIRCUIT SHORTED TO GROUND |
| (R263) DRIVER SEAT POSITION SENSOR VOLTAGE CIRCUIT SHORTED TO GROUND |
| (Z261) DRIVER SEAT POSITION SENSOR GROUND CIRCUIT OPEN |
| (R263) DRIVER SEAT POSITION SENSOR VOLTAGE CIRCUIT OPEN |
| DRIVER SEAT TRACK POSITION SENSOR |
| OCCUPANT RESTRAINT CONTROLLER (ORC) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .