RF-Hub Replacement And Programming Order Guide
WARNING: This page is about a different car, the 2013 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
Match the Module(s) being replaced with the column repair condition that applies to the repair being performed.
| Module being replaced | Module Replacement Guide | |||||||
|---|---|---|---|---|---|---|---|---|
| Repair Condition 1 | Repair Condition 2 | Repair Condition 3 | Repair Condition 4 | Repair Condition 5 | Repair Condition 6 | Repair Condition 7 | Repair Condition 8 | |
| RF-HUB | New Module | New Module | Existing Module | Existing Module | New Module | Existing Module | Existing Module | New Module |
| Ignition FOBIKs | New Module | Existing Module | New Module | Existing Module | Existing Module | Existing Module | New Module | New Module |
| ELV (JC only) / ESCL (BUX only) | New Module | New Module | Existing Module | Existing Module | Existing Module | New Module | New Module | Existing Module |
| Scan Tool Programming Order Guide | ||||||||
| 1 | Program Ignition FOBIKs (ignition off) | Program Ignition FOBIKs (ignition off) | Program Ignition FOBIKs (ignition off) | Should not get into this case. If the RF-HUB is replaced, the ELV/ESCL must be replaced at the same time! Replace ELV/ESCL and refer to Repair Condition 2. | Should not get into this case. If the RF-HUB is replaced, the ELV/ESCL must be replaced at the same time! Replace ELV/ESCL and refer to Repair Condition 2. | Should not get into this case. If the RF-HUB is replaced, the ELV/ESCL must be replaced at the same time! Replace ELV/ESCL and refer to Repair Condition 1. | Should not get into this case. If the RF-HUB is replaced, the ELV/ESCL must be replaced at the same time! Replace ELV/ESCL and refer to Repair Condition 1. | |
| 2 | RF-HUB Replace | RF-HUB Replace | ||||||
| 3 | ELV or ESCL Replace | ELV or ESCL Replace | ||||||