LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 698 (Electronic Control Modules (Service Information)) >> Module, Adaptive Cruise Control >> Removal >> Module And Bracket
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module And Bracket

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Raise and support the vehicle.
  3. Remove the front fascia from the vehicle. Refer to FASCIA, FRONT, REMOVAL .
    Fig 1: Adaptive Cruise Control Module Connector
    GC0170255Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the wiring harness connector (1) from the Adaptive Cruise Control (ACC) module.
  5. Remove the energy absorber from the vehicle.
    Fig 2: Adaptive Cruise Control Module Bracket & Screws
    GC0170147Courtesy of CHRYSLER GROUP, LLC
  6. Remove the two screws (2) that secure the bracket (1) to the front bumper support bar.
  7. Remove the mounting bracket from the bumper support bar.
scientia non olet · About LEMON Manuals