LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 698 (Electronic Control Modules (Service Information)) >> Module, Radio Frequency (RF Hub) >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Radio Frequency (RF Hub): Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Replace and Program the module(s) per the RF-Hub, BCM, PCM FOBik and ELV Replacement and Programming Order Guide. Refer to STANDARD PROCEDURE .

Fig 1: Radio Frequency Hub Module Retainers, Connectors & Antenna
GC0170521Courtesy of CHRYSLER GROUP, LLC
  1. Position into place and install the Remote Frequency Hub Module (RFHM) and retainers (1).
  2. Connect the electrical connectors (2).
  3. If equipped, connect the remote start antenna (3).
  4. Install the rear shelf cover. Refer to PANEL, REAR SHELF, INSTALLATION .
  5. Connect the negative battery cable.
NOTE:

Program the RFHM in accordance with the module replacement and programming guide. Refer to STANDARD PROCEDURE .

scientia non olet · About LEMON Manuals