Module, Adaptive Front Lighting System (AFLS): Removal
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Locate the Adaptive Front Lighting System (AFLS) module (1) at the right front corner of the Power Distribution Center (PDC) in the right front corner of the engine compartment.
- Release the AFLS module latch tab by pressing it toward the PDC.
- While holding the AFLS module latch tab in the released position, pull the module upward to disengage it from the blade-type mount (2) integral to the right front corner of the PDC bracket.
- Disconnect the headlight and dash wire harness connector (3) from the AFLS module connector receptacle.
- Remove the AFLS module from the vehicle.