Diagnostic Test

CHECK FOR AN ACTIVE DTC
NOTE:
If DTC U0010-00-CAN INTERIOR BUS or U0011-00-CAN INTERIOR BUS OFF PERFORMANCE is set in the Body Control Module (BCM), diagnose this DTC before continuing with this diagnostic procedure.
1. Turn the ignition on.
2. With the scan tool, read active DTCs.
  Does the scan tool display this DTC as active?
  
  Yes
  - Refer to DIAGNOSIS AND TESTING and perform the NO RESPONSE FROM HVAC (A/C HEATER CONTROL MODULE) diagnostic procedure.
  No
  - Refer to DIAGNOSIS AND TESTING and perform the STORED LOST COMMUNICATION DTCS diagnostic procedure.