LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2013 >> Viper Base >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Camshaft Position: Installation: Installation

Fig 1: View Of Camshaft Position Sensor
GC0135295Courtesy of CHRYSLER GROUP, LLC
  1. Carefully twist and push the camshaft position sensor (2) into the engine block (3) until seated.
  2. Install the sensor mounting bolt (1) and tighten bolt to 6.2 N.m (55 in. lbs.).
    Fig 2: Identifying Sensor Electrical Connectors
    GC0135289Courtesy of CHRYSLER GROUP, LLC
  3. Connect the camshaft position sensor electrical connector (1).
    Fig 3: Cowl Screen Panel
    GC0135294Courtesy of CHRYSLER GROUP, LLC
  4. Install the wiper cowl panel (3) Refer to COVER, COWL PANEL, INSTALLATION .
  5. Connect the negative battery cable and tighten the nut to 5 N.m (44 in. lbs.).
scientia non olet · About LEMON Manuals