LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2014 >> Challenger SXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control >> Installation >> Diesel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Powertrain Control: Installation: Diesel

WARNING: This page is about a different car, the 2014 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Powertrain Control Module (PCM), Nuts & Bolts
GC0159191Courtesy of CHRYSLER GROUP, LLC
  1. Check pin connectors in Powertrain Control Module (PCM) and the wire harness connectors for corrosion or damage. Also check pin heights in connectors. Pin heights should all be the same. Repair as necessary before installing harness connectors.
  2. Install the PCM (1) and securely tighten bolts (2), nut (3).
    Fig 2: Powertrain Control Module (PCM) & Harness Connectors
    GC0159536Courtesy of CHRYSLER GROUP, LLC
  3. Connect the PCM wire harness connector (1).
  4. Connect the negative battery cable.
  5. Use a diagnostic scan tool to reprogram new PCM with vehicles original Vehicle Identification Number (VIN) and original vehicle mileage. Refer to the appropriate Testing & Diagnostics article in Engine Performance .
scientia non olet · About LEMON Manuals