LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2014 >> Challenger SXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Power Distribution) >> Module, Power Inverter >> Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Power Inverter: Installation: Removal

WARNING: This page is about a different car, the 2014 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the PIM and bracket to the proper position and install using two fasteners.
  2. Connect the electrical connector to the PIM once the PIM has been secured in position by fasteners.
  3. Position the duct into position and snap/secure in place. Refer to DUCT, FLOOR DISTRIBUTION, INSTALLATION .
  4. Connect the battery cable to the negative battery post.
scientia non olet · About LEMON Manuals