Diagnostic Test
- CHECK THE TIPM FOR DTCS
- With the scan tool, check for TIPM DTCs.
Does the TIPM report the DTC U0001-CAN C BUS DTC or U0121-LOST COMMUNICATION WITH ANTI-LOCK BRAKE MODULE?
Yes
- Refer to the TIPM DIAGNOSTIC CODE INDEX and perform the appropriate diagnostic procedure.
- Perform NAG1 TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Go To 2
- With the scan tool, check for TIPM DTCs.
- CHECK FOR ABS DTCS
- With the scan tool, read ABS DTCs.
Are there any ABS DTCs present?
Yes
- Refer to the appropriate ANTILOCK BRAKE SYSTEM (ABS) ELECTRICAL DIAGNOSTICS article and perform the appropriate diagnostic procedure.
- Perform NAG1 TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Using the schematics as a guide, check the Transmission Control Module (TCM) connectors and terminals for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace and program the TCM in accordance with the Service Information.
- Perform NAG1 TRANSMISSION VERIFICATION TEST. Refer to STANDARD PROCEDURE .
- With the scan tool, read ABS DTCs.