LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2014 >> Durango R/T, AWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 5.7L - Intermittent Condition, Pcm/ECM Reprogramming - Gas, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure >> Standard Procedure >> Pcm/ECM Reprogramming - Gas >> Repair Procedure - Using WITECH™ Diagnostic Application
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure - Using WITECH™ Diagnostic Application

  1. An overview of ECU flashing is available in the wiTECH™ Diagnostic Application. This overview may be found by first selecting the "Help" tab, then "Help Contents." This will open the wiTECH™ Help System. Selecting "Flashing an ECU" under the "Using the wiTECH™ Diagnostic Application" heading will display a step-by-step instructional guide to flashing an ECU. An instructional video can also be viewed by selecting "Flash ECU" under the "Videos" heading.
  2. Continue to SECTION 2 - ADDITIONAL PCM/TCM REPLACEMENT PROCEDURES  to complete the process if the ECU has been replaced.
  3. Type the necessary information on the "Authorized Modification Label" (P/N 04275086AB) and attach near the VECI label (Refer to SECTION 3 - AUTHORIZED MODIFICATION LABEL  for details).
scientia non olet · About LEMON Manuals