Module, Body Control: Installation: Installation

Fig 1: Body Control Module & Fasteners

Courtesy of CHRYSLER GROUP, LLC

1. Install the BCM to the mounting bracket.
2. Install all the fasteners (2) to secure the BCM to the bracket.
3. Connect all harness connectors to the BCM assembly.
   Fig 2: Scuff Plate & Screws

   Courtesy of CHRYSLER GROUP, LLC
4. Install the passenger side lower cowl panel (1).
5. Install the passenger side lower dash closeout panel.
6. Connect the negative battery cable to the proper battery post.
7. Program the BCM in accordance with the module replacement and programming guide. Refer to STANDARD PROCEDURE .