Programming The Kin
CAUTION:
Read all notes and cautions for programming procedures.
- Connect a battery charger to the vehicle.
- Connect the scan tool.NOTE:
Have a unique vehicle PIN readily available before running the routine
NOTE:If the PCM and KIN are replaced at the same time, the PCM MUST be programmed before the KIN.
- Select "ECU View."
- Select "KIN".
- Select "Miscellaneous Functions."
- Select "KIN Replaced".
- Enter the PIN when prompted.
- Cycle ignition key after the successful routine completion.
NOTE:
If the PCM and the KIN are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new KIN.