April 5, 2026: LEMON Manuals is launched! Read the announcement.

Step-By-Step Instructions

WARNING: This page is about a different variant/trim than selected.

PCM/ECM Replaced

The vehicle pin (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:

The original selling invoice
DealerCONNECT > Parts > Key Codes
Contacting the District Manager.

From the "Home" screen, select "ECU View"

Select the applicable Security Module
Select "Misc. Functions"
Select "PCM/ECM Replaced" and follow the on screen instructions.
When complete, select "Finish"

Check PCM VIN

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Check PCM/ECM VIN" and follow the on screen instructions.
When complete, select "Finish"

Diesel Particulate Filter (Used) Learning

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Diesel Particulate Filter (Used) Learning" and follow the on screen instructions.
When complete, select "Finish"

ECU Replacement with Value Transfer

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "ECU Replacement with Value Transfer" and follow the on screen instructions.
When complete, select "Finish"

ECU Replacement without Value Transfer

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "ECU Replacement without Value Transfer" and follow the on screen instructions.
When complete, select "Finish"

Enable / Disable Vehicle Features

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Enable / Disable Vehicle Features" and follow the on screen instructions.
When complete, select "Finish"

Exhaust Throttle Plate Adaptive Learn Position

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Exhaust Throttle Plate Adaptive Learn Position" and follow the on screen instructions.
When complete, select "Finish"

Fuel Mean Value Adaptation Initialization

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Fuel Mean Value Adaptation Initialization" and follow the on screen instructions.
When complete, select "Finish"

IMA Rapid Calibration

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "IMA Rapid Calibration Test" and follow the on screen instructions.
When complete, select "Finish"

Initialize EGS

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Initialize EGS" and follow the on screen instructions.
When complete, select "Finish"

Injector Quantity Adjustment

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Injector Quantity Adjustment" and follow the on screen instructions.
When complete, select "Finish"

Mobile DeSoot - NO Minimum Required Soot Load

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Mobile DeSoot - NO Minimum Required Soot Load" and follow the on screen instructions.
When complete, select "Finish"

NOx Catalyst (New) Initialization

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "NOx Catalyst (New) Initialization" and follow the on screen instructions.
When complete, select "Finish"

Program Variant Code

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Program Variant Code" and follow the on screen instructions.
When complete, select "Finish"

Quicklearn

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Quicklearn" and follow the on screen instructions.
When complete, select "Finish"

Reset Regenerative Filter Timers

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Reset Regenerative Filter Times" and follow the on screen instructions.
When complete, select "Finish"

Set Oil Dilution Mass Value

From the "Home" screen, select "ECU View"

Select "PCM/ECM"
Select "Misc. Functions"
Select "Set Oil Dilution Mass Value" and follow the on screen instructions.
When complete, select "Finish"