LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2015 >> Charger R/T >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Bank 1
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Bank 1

  1. Disconnect and isolate the negative battery cable.
    Fig 1: Disconnecting/Connecting PCV Hose
    GC0170176Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the right side PCV hose (2) from the supercharger and position aside.
    Fig 2: TMAP Sensor, Connector & Screw
    GC0170244Courtesy of CHRYSLER GROUP, LLC
  3. Clean the area around Temperature and Manifold Absolute Pressure (TMAP) sensor (2).
  4. Disconnect the TMAP sensor wire harness connector (1).
  5. Remove screw (3) and the TMAP sensor (2) from supercharger.
scientia non olet · About LEMON Manuals