Module, Drivetrain Control: Operation: Operation: Inputs/Outputs
WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The following are inputs to the DTCM:
- Lateral Accelerometer
- Transfer Case Mode Sensor Signal
- 2 Direct Battery Feeds
- Ignition RUN Sense
- Sensor Grounds
- Module Grounds
- CAN C Bus
The following are outputs of the DTCM:
- 5V Sensor Supply
- Transfer Case Bi-directional Motor Control (A AND B)
- Switched B+ Solenoid Supply
- Transfer Case Motor Brake Control