Module, HVAC: Installation: Installation

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: HVAC Module, Connectors & Screws

Courtesy of CHRYSLER GROUP, LLC

Position the HVAC module (3) to the Instrument Panel.
Install the three retaining screws (1) that secure the HVAC module to the HVAC housing.
Tighten all the screws that secure the HVAC module to the HVAC housing to 2 N.m (17 in. lbs.).
Connect the wire harness connectors (2) to the HVAC module.
Install the Radio. Refer to RADIO, INSTALLATION .
Connect the negative battery cable.
Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .