Module, Heated Seat: Removal: Removal
WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The Heated Seat Module mounting tab can be damaged during module removal and installation. Use care to properly align tab to prevent binding that could result in tab breakage.
- Position the driver front seat to the full rearward position.
- Disconnect and isolate the battery negative cable.
- Disconnect the wire harness connector (4) from the heated seat module (3).
- Unsnap the heated seat module retaining tab (2) from the seat pan (1).
- Remove the heated seat module (3) from the vehicle.