LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2015 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Keyless Ignition Node >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Keyless Ignition Node: Removal: Removal

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Center Bezel Retaining Clips
GC0145461Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
    Fig 2: Wire Connector, Clips & KIN
    GC0147718Courtesy of CHRYSLER GROUP, LLC
  3. Reach through the Integrated Center Stack (ICS) screen opening and disconnect the Keyless Ignition Node (KIN) electrical connector (1).
  4. Press on the three tabs (2) (two on top and one on bottom) and push the KIN (3) out the front of the instrument panel.
scientia non olet · About LEMON Manuals