Module, Keyless Ignition Node: Installation: Installation

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wire Connector, Clips & KIN

Courtesy of CHRYSLER GROUP, LLC

Push the Keyless Ignition Node (KIN) (3) into the instrument panel until it snaps into place.
Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector (1).

Fig 2: Center Bezel Retaining Clips
Courtesy of CHRYSLER GROUP, LLC
Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
Connect the negative battery cable.