LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2015 >> ProMaster City SLT >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (3.6L - Intermittent Condition, Pcm/ECM Reprogramming, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure) >> Standard Procedure >> Pcm/ECM Reprogramming - Gas >> Repair Procedure - Using WITECH™ Diagnostic Application
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure - Using WITECH™ Diagnostic Application

WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. An overview of ECU flashing is available in the wiTECH™ Diagnostic Application. This overview may be found by first selecting the "Help" tab, then "Help Contents." This will open the wiTECH™ Help System. Selecting "Flashing an ECU" under the "Using the wiTECH™ Diagnostic Application" heading will display a step-by-step instructional guide to flashing an ECU. An instructional video can also be viewed by selecting "Flash ECU" under the "Videos" heading.
  2. Continue to SECTION 2 - ADDITIONAL PCM/TCM REPLACEMENT PROCEDURES  to complete the process if the ECU has been replaced.
  3. Type the necessary information on the "Authorized Modification Label" (P/N 04275086AB) and attach near the VECI label (See SECTION 3 - AUTHORIZED MODIFICATION LABEL  for details).
scientia non olet · About LEMON Manuals